Lead-lined boards
Building boards laminated with lead sheet SCHNEIDER produces structural panels with a rear-side lead foil lamination for radiation protection and sound insulation. These laminated structural panels are easy to handle and offer an economic method of separating rooms in drywall construction. Gypsum, gypsum fibre boards and chipboards are suitable as support materials.

Building boards laminated with lead sheet SCHNEIDER delivers gypsum panels with a lead foil lamination of up to 3 mm. If higher lead thicknesses are required, the construction can be produced with a double layer of planking. The thickness of the lead depends on the required lead equivalent. The requirements laid down in the Radiation Protection Ordinance and the radiation protection plan must be taken into account.

VarioShieldPlus
VarioShieldPlus Innovative radiation protection boards facilitate the installation of radiation-protected rooms. VarioShieldPlus has a front edge with an excess end of lead and a flattened edge. Due to the overlapping installation of the boards the horizontal joints are already radiation-protected. It's no longer necessary to install lead strips beneath the boards. One additional advantage: Basically there is hardly any cutting scrap anymore, since the remaining boards can be cutted flexibly. The craftsman determines the remaining length of the board and cuts it fittingly on the side with the flattened edge. The remaining board will be used for the next stator frame, beginning at the bottom.
Details (PDF, 1,60 MB)

Sound Insulation
Due to their surface weight laminated gypsum panels are capable of insulating thin-walled constructions effectively against noise. The improvement depends on the thickness of the lead foil and the conditions of the noise flanking sound passages. A gypsum plate with a 1 mm-thick lead sheet lamination can, depending on the installation situation, achieved an increase in sound insulation of 12dB.
Schneider Protect-SK
Self-adhesive lead stripsAs a supplementary product, SCHNEIDER produces self-adhesive lead strips in order to cover joints. Schneider Protect-SK is available in the standard series in material thicknesses of 0,50 to 3,00 mm and in a width of 50 mm.
Standard dimensions

Schneider Protect GKF 12,5 mm
Lead-lined board
 
LeadWidthLength
0,5 mm625 mm2.000 mm
1,0 mm625 mm2.000 mm
1,5 mm625 mm2.000 mm
2,0 mm625 mm2.000 mm
2,5 mm625 mm2.000 mm
3,0 mm625 mm2.000 mm
 
VarioShieldPlus GKF 12,5 mm
Lead-lined Board with a flattened edge
 
LeadWidthLength
0,5 mm625 mm2.000 mm
1,0 mm625 mm2.000 mm
1,5 mm625 mm2.000 mm
2,0 mm625 mm2.000 mm
2,5 mm625 mm2.000 mm
3,0 mm625 mm2.000 mm
Small format
0,5 mm625 mm1.200 mm
1,0 mm625 mm1.200 mm
1,5 mm625 mm1.200 mm
2,0 mm625 mm1.200 mm
2,5 mm625 mm1.200 mm
3,0 mm625 mm1.200 mm
 
Schneider Protect-SK
Self-adhesive lead strips
0,50x50x20.000 mm 
1,00x50x10.000 mm 
1,50x50x10.000 mm 
2,00x50x10.000 mm 
3,00x50x8.000 mm 
 
Further dimensions and designs are available on request.